ROEMHELD虎钳WS5-4501

WS5-4501

MCP 系列 5 轴固定钳口手动虎钳

固定钳口，机械操作

规格和信息

特征

允许不受限制地访问刀具以进行多面加工

获得专利的滑动钳口段设计

一个固定的下颚和一个夹紧它的移动钳口

提供下面显示的四种尺寸

概述

MCP-series 5-axis vises have optimal features to allow unrestricted tool access for multiple-side machining. The standard fixed-jaw version shown here has one fixed jaw, and one moving jaw that clamps against it. Available in the four sizes shown below, with the following jaw widths:

            40mm

60mm

100mm

125mm

The MCP series is a further refinement of our high-precision MC vise series. These new vises combine a very compact, fully enclosed design with a patented sliding-jaw segment design. Thanks to the adjusting spindle arranged in the upper part of the housing, deformation in the base during clamping is reduced to a minimum, providing high rigidity of the entire workholding system. The patented segment design ensures a high degree of precision and stability, reducing guiding clearance to nearly zero.

Mounting on Quintus 1 Riser 

Quintus Vise Adaptor Plate

Due to its small size, the MC40 vise must first be mounted on a Quintus Vise Adaptor Plate (CL-130-01-QRFP), which is then mounted on the Quintus 1 riser. To locate the vise on the adaptor plate, use two Fixture Locating Pins, a round pin for zero-point centering and a diamond pin for single-axis centering. To fasten the vise, use six M6 x 30mm socket-head cap screws inserted through the plate from below. Next, install a Quintus 1 pull-down bolt in the adaptor plate’s M10 bottom center hole. To locate the adaptor plate, the Quintus 1 riser utilizes its two integral locating pins, a round pin for zero-point centering and a diamond pin for single-axis centering, which fit into the two 10mm locating holes underneath the plate. Turning the Quintus mechanism exerts 2700 lbs of force on the pull-down bolt. See Related Products below for mounting accessories.

Mounting on a Vise Adaptor Plate

Vise Adaptor Plate mounted directly on a rotary table. To locate the vise, use two Fixture Locating Pins, a round pin for zero-point centering and a diamond pin for single-axis centering. To fasten the vise, use six M6 x 30mm socket-head cap screws inserted through the plate from below. See Related Products below for mounting accessories