APAQ-C130TC瑞典INOR温度变送器是一种高可靠性、高性能的现代化温度变送器。外部环境温度、振动、湿度、EMC干扰等对设备性能的影响极小。

APAQ-C130TC瑞典INOR温度变送器设定参数操作简单。您可以轻松地通过NFC与智能手机或平板电脑无线配置设定。不需要昂贵的配置工具或固定的工作站。




技术参数

Input TC

TC type B - Pt30Rh-Pt6Rh (IEC 60584) 0...+1820 °C / +32...+3308 °F

TC type E - NiCr-CuNi (IEC 60584) -270…+1000 °C / -454...+1832 °F

TC type J - Fe-CuNi (IEC 60584) -210…+1200 °C / -346...+2192 °F

TC type K - NiCr-NiAl (IEC 60584) -270…+1300 °C / -454...+2372 °F

TC type N - NiCrSi-NiSi (IEC 60584) -270…+1300 °C / -454...+2372 °F

TC type R - Pt13Rh-Pt (IEC 60584) -50...+1750 °C / -58...+3182 °F

TC type S - Pt10Rh-Pt (IEC 60584) -50…+1750 °C / -58...+3182 °F

TC type T - Cu-CuNi (IEC 60584) -270…+400 °C / -454...+752 °F

Input impedance >10 MΩ

Maximum wire loop resistance In-head transmitter (including TC sensor): 5 kΩ

Cold Junction Compensation (CJC) Internal or fixed

Monitoring

Sensor break indication Upscale (≥21.0 mA) or downscale (≤3.6 mA) action

Output

Output signal 4...20 mA, temperature linear

NAMUR compliance Current limitations and failure currents acc. to

NAMUR NE 43

Adjustable filtering level 0.4 to 26 sec.

Permissible load, see load diagram 818 Ω @ 24 VDC

General data

Isolation Not galvanically isolated

Power supply, polarity protected 6...32 VDC

Environment conditions

Ambient temperature Storage and operation -40...+85 °C / -40...+185 °F

Humidity 0...98 % RH (non-condensing)

Vibrations Acc. to IEC 60068-2-6, test Fc, 10...2000 Hz, 10 g

Rough Handling Acc. to IEC 60068-2-31:2008, test Ec

EMC Standards Directive: 2014/30/EU

Harmonized standards: EN 61326-1, EN 61326-2-3

Immunity performance ESD, Radiated EM-field, Magnetic Fields: Criteria A

Burst, conducted RF: Criteria A

Surge: standard deviation 1 % of span

RoHS, China RoHS Directive: 2011/65/EU and 2015/863/EU

Harmonized standard: EN IEC 63000

China RoHS 2

Accuracy and stability

Accuracy (Maximum of)

TC type R, S, T ±2.0 °C or ±0.2 % of span / ±3.6 °F or ±0.2 % of span

TC type B (<100 °C / <212 °F) not specified

TC type B (100 °C...400 °C / 212 °F...752 °F) ± 10 °C / ± 18 °F

TC type B (>400 °C / >752 °F) ±2.0 °C or ±0.2 % of span / ±3,6 °F or ±0.2 % of span

TC type E, J, K ±1 °C or ±0.2 % of span / ±1.8 °F or ±0.2 % of span

TC type N (-100...+1300 °C) ±1 °C or ±0.2 % of span / ±1.8 °F or ±0.2 % of span

TC type N (-270...-100 °C) ±2.0 °C / ±3.6 °F

CJC accuracy Typical ±1 °C / ±1.8 °F (max ±3 °C / ±5.4 °F)

within ambient temperature range

Warm-up time After a max. 20 minutes the accuracy specifications are reached (due to the internal cold junction)

Min. span

TC type B 700 °C / 1260 °F

TC type R, S, 300 °C / 540 °F

TC type E, J, K, T 50 °C / 90 °F

TC type N 100 °C / 180 °F

Temperature influence

TC type B, E, J, K, R, S, T ±0.02 % of span per °C / ±0.012 % of span per °F

TC type N (-100...+1300 °C) ±0.02 % of span per °C / ±0.012 % of span per °F

TC type N (-270...-100 °C) ±0.2 % of span per °C / ±0.12 % of span per °F

Supply voltage influence <±0.005 % of span per V

Long-term stability ±0.05 % of span per year